Primary Seal Windows and Doors

Advanced Technology in Windows and Doors

Toronto - 416 739 9545
Western Canada - 1 888-959-3667

Request a Free Estimate


Posts Tagged ‘Doors’

Fall into Energy Savings!

October 12th, 2010
Comments Off on Fall into Energy Savings!

The cost of gas and electricity are always on the rise and with what is predicted to be a more ‘traditional’ Canadian winter around the corner, it is important to try and reduce the amout of energy your home wastes. Also, you want to make the most of the free energy from the sun, whenever it is available. New glass technology makes this possible by trapping the solar heat in your home but reducing the amount of radiated heat lost in the winter. You can look up my previous article on Low-E glass for more in-depth information. Even if you have newer windows made of aluminum or vinyl, if they do not have Low-E+Argon glass, you may be missing out on substantial energy gains. Did you know that most newer windows have something called a dry glazing bead/glazing stop which allows the glass units to be serviced or replaced without having to remove the window from the wall or damage the interior of your home? For a fraction of the price of getting new windows, you can replace your glass units and have them properly sealed with silicone, affording you a quick and easy way to significantly improve your comfort and energy efficiency. How do you know if your window has such a feature? Just take one picture of the overall window and one photo of the corner of the window where the glass unit meets the frame and then send it to us at and we will be able to tell you if the glass can be replaced.

If changing your windows is not in your budget, you should still do all you can to prevent heat loss. There are many products available at Home Depot for you to seal up old windows and get them to last through the winter until you can afford to change them next summer. We of course offer financing options that would allow you to get your windows now and pay for them next year with as low as 1.5% interest.

Finally, do not forget your doors. Most doors that I see on existing houses are in very poor shape when it comes to air sealing. You see a builder standard door that most houses have does a good job of insulating from the cold, however, if the weatherstripping or the bottom sweep are damaged or broken, air will stream in – cold air – and negate all the good insulation IN the door as the cold is going AROUND it. Silicone, weatherstripping, caulking and sweeps are all available at Rona, Home Depot, Lowes etc. Do yourself a favor and make sure that the door is sealing well. Also, doors often need their hinges to be adjusted as they have sagged over time. This should be done by a professional, but, in most cases it just involves drilling a couple of screws and it can go a long way toward making the door seal and close properly.

Please do not hesitate to contact us with any of your door or window concerns as our highly knowledgeable staff is always looking to help. Better yet, drop by our factory showroom. As always I look forward to your comments and questions.

Doors, Energy Efficiency, Windows , , , , , , , ,

Open Your Doors to Style and Savings

May 17th, 2010
Comments Off on Open Your Doors to Style and Savings

While windows are important to the appearance and energy efficiency of your home, front, side and back doors are often neglected by consumers. A new door will not only enhance the appearance of your home, but it may save you a surprising amount of energy in both winter and summer.

Many of the high-end custom homes that you see have at the very core of their look a large and attractive set of doors. Take that away, and the entire home would look unfinished and awkward. A new door can significantly improve the appearance of any home, large or small, by creating a visual focal point. Sure, you say, the look is nice but is it worthwhile to pay for a new door just for the sake of vanity? Well of course not.

A new door is more than a visual improvement, it works in many ways to save you energy, make you more comfortable and keep you safer. All new steel entry doors come filled with highly insulating polyurethane. Also, most decorative or clear glass units are available in ‘Low-E’ energy saving glass. Finally, new steel doors also come with a raised sweep and magnetic weather seals.

For many homeowners safety is a primary concern. That is why new steel doors are available with a multipoint locking system which is far superior to a single deadbolt. We also provide traditional deadbolt doors with a steel insert in the door frame which significantly inrcreases the strength of the deadbolt mechanism.

Ask any of our trained staff or customer representatives and you will find a number of benefits to replacing an old, leaky, drafty door with a secure, attractive and functional steel door.

If you have any additional comments or concerns, please contact us.

Doors, Energy Efficiency , , , ,

Why Winter Installations are a Good Idea?!

November 10th, 2009
Comments Off on Why Winter Installations are a Good Idea?!

I know what you are thinking. Everybody knows that the spring, summer and fall are the best times to get new windows and doors installed. Everyone that is, except those of us who want to renovate on a budget. The best part of a January or February installation is the price you will pay. You see, statistically speaking, most retail and renovation businesses have the slowest months in January and February because everyone is broke from Christmas and New Year’s and not to mention the less than pleasant Canadian weather we experience during those months. As such, many companies including Primary Seal, are willing to introduce incentives to attract customers as well as they are more flexible at the negotiating table. In June, when we are already booked up until August, is not the time to negotiate.

However, most of you are questioning how we can do a job in such cold temperatures without turning your house into an ice palace and having all our materials freeze and no longer perform properly. Well let’s address one issue at a time.

How do we manage to take out an old window or door and put a new one in without having your home exposed to the cold for a prolonged period of time? The answer is custom sizing. The windows or doors that we make for your home come already assembled from the factory and ready to install. Not only that but they are custom fitted to the size and shape of your existing opening in the wall, meaning that after removing the old window or door, the new one can go into the rough opening within a couple of minutes. In fact the process of taking a window (of average size) out and putting the new one into the opening takes about ten to fifteen minutes. The window can then be quickly sealed with insulating foam and heat will no longer escape. The bulk of the time required to install a window is taken up by the finishing, both interior and exterior. It is the same case with a door. While the door is more complex to adjust and takes a longer time, it can also be sealed within a reasonable timeframe and as such the amount of heat loss is not catastrophic. We also use a little trick and close all the doors to all the rooms which makes it harder for the heat to escape quickly, as well as we work on one opening at a time, which also reduces the heat loss.
Read more…

Doors, Windows , , ,

Casement Windows
| Single Hung Windows | Double Hung Windows | Sliding Windows | Double Slider Windows | Awning Windows | Picture Windows | Bay Windows
Steel Doors | Garden Patio Doors | Patio Doors Toronto

Home | About Us | Windows | Doors | Tips & Care | FAQ's | Contact Us | Site Map

Toronto Vinyl Windows | Toronto Windows and Doors | Regina Vinyl Windows | Toronto Windows and Doors Manufacturer | Regina Windows and Doors Manufacturer

© 2020 Primary Seal Windows and Doors